Installing the PostScript 3 Printer Driver (Windows XP/Vista, Windows Server 2003/2003 R2)
Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the SmartDeviceMonitor port.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Step 5 does not apply for Windows Vista users.
Click [Next >].
Click [Local printer attached to this computer], and then click [Next >].
If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.
If you are using Windows Vista, you do not need to click [Next >].
Click [Create a new port:].
Click [Standard TCP/IP Port] in [Create a new Port], and then click [Next >].
Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
Enter the printer name or IPv4 address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name if necessary.
When screen for Device selection appears, select "RICOH NetworkPrinter Driver C Model".
Click [Next >].
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
Check that the name of the printer whose driver you want to install is selected, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Step 15 does not apply for Windows Vista users.
Specify whether or not to share the printer, and then Click [Next >].
Specify whether or not to print a test page, and then click [Next >].
If you are using Windows Vista, you do not need to click [Next >].
Click [Finish].
The printer driver installation starts.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.
