Installing the PostScript 3 Printer Driver (Windows XP/Vista, Windows Server 2003/2003 R2 - IPP)
Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Step 5 does not apply for Windows Vista users.
Click [Next >].
Click [Local printer attached to this computer], and then click [Next >].
If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.
If you are using Windows Vista, you do not need to click [Next >].
Click [Create a new port:].
Click [SmartDeviceMonitor], and then click [Next >].
Click [IPP].
In the [Printer URL] box, enter "http://(printer's address)/printer" as the printer's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted communication), enter "https://(printer's address)/printer" (Internet Explorer 5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.
Click [Detailed Settings] to make necessary settings, and then click [OK].
For information about the settings, see SmartDeviceMonitor for Client Help.
Click [OK].
Check that the name of the printer driver you want to install is selected, and then click [Next >].
Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Step 16 does not apply for Windows Vista users.
Specify whether or not to share the printer, and then click [Next >].
Specify whether or not to print a test page, and then click [Next >].
If you are using Windows Vista, you do not need to click [Next >].
Click [Finish].
The printer driver installation starts.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.
