Installing the PostScript 3 Printer Driver (Windows 2000 - IPP)
Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
IPv6 cannot be used under Windows 2000.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Next >].
Click [Local printer], and then click [Next >].
If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.
Click [Create a new port:].
Click [SmartDeviceMonitor], and then click [Next >].
Click [IPP].
In the [Printer URL] box, enter "http://(printer's address)/printer" as the printer's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted communication), enter "https://(printer's address)/printer" (Internet Explorer 5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the name of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.
Click [Detailed Settings] to make necessary settings, and then click [OK].
For information about the settings, see SmartDeviceMonitor for Client Help.
Click [OK].
Check that the name of the printer whose driver you want to install is selected, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Specify whether or not to share the printer, and then click [Next >].
Specify whether or not to print a test page, and then click [Next >].
Click [Finish].
The printer driver installation starts.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.
