Skip header
 

Mainframe

Configuration:

Desktop

Print Process:

Laser beam scanning & Electrophotographic printing

Dualcomponent development

First Print Speed:

7.5 sec or less (A4image, 81/2×11image)

Printing Speed:

Maximum 31 pages per minute (A4image, 81/2×11image)

Resolution:

1,200 × 600 dpi (RPCS, PostScript 3, PCL 6)

600 × 600 dpi (RPCS, PostScript 3, PCL 5e/6)

300 × 300 dpi (RPCS, PostScript 3, PCL 5e)

Paper size:

Paper Weight:

Media Type:

Paper Output Capacity:

Standard 250 sheets (80 g/m2, 20 lb.)

Paper Input Capacity:

Standard Paper Tray

500 sheets *1

Bypass Tray *2

100 sheets *1

Optional Paper Feed Unit

500 sheets × 2 *1

Optional Envelop Feeder Unit *3

60 sheets *1

*1 Paper weight: 60 - 130 g/m2 (16 - 34 lb.)

*2 You can load up to 10 envelopes (55 - 157 g/m2, 14 - 42 lb.) at the same time.

*3 To use the envelope feeder unit, the optional paper feed unit is required. The paper tray of the feed unit can be replaced with the envelope feeder unit. For more information about envelopes, see Types of Paper and Other Media.

Power Source:

image

220 - 240 V, 4.3 A or more, 50/60 Hz

image

120 V, 8 A or more, 60 Hz

Power Consumption:

image


Mainframe

With full options

Printing

970 W or less

990 W or less

Energy Saver

6.5 W or less

12.5 W or less

image


Mainframe

With full options

Printing

930 W or less

960 W or less

Energy Saver

4.5 W or less

10 W or less

Dimensions:


Width

Depth

Height

Printer only (Bypass Tray not extended)

388 mm (15.2 ")

450 mm (17.7 ")

345 mm (13.6 ")

Printer only (Bypass Tray extended)

388 mm (15.2 ")

508 mm (20.0 ")

345 mm (13.6 ")

Printer with paper feed unit (one optional)

388 mm (15.2 ")

450 mm (17.7 ")

480 mm (18.8 ")

Printer with two optional paper feed unit

388 mm (15.2 ")

450 mm (17.7 ")

615 mm (24.2 ")

Weight:

Approximately 17 kg (37.5 lb) (power cord included)

Noise Emission *1 :

Sound Power Level : Main frame only

Stand-by

42 dB (A)

During Printing

65 dB (A)

Sound Pressure level : Main frame only *2

Stand-by

36 dB (A)

During Printing

59 dB (A)

*1 The preceding measurements made in accordance with ISO7779 are actual values.

*2 Measured at the position of a bystander.

Memory:

Standard 192 MB, up to 384 MB (with the optional Memory Unit)

Interface:

Standard:

  • Ethernet (10/100Base-TX)

  • USB2.0

    It requires a USB computer port and cable that support USB2.0.

  • Parallel (Bidirectional IEEE1284)

Optional:

  • IEEE 802.11b (Wireless LAN)

  • Gigabit Ethernet board

Printer Language:

RPCS, PCL 5e/6, PostScript Level 3, PDF

Fonts:

PCL 5e/6

  • Monotype Imaging 35 Intellifonts, 10 TrueType fonts, 13 International fonts, and 1 Bitmap font.

PostScript 3, PDF

  • 136 fonts (Type 2:24, Type 14:112)

Note

  • If the printer has not been used for a while, there may be a short delay before the first page starts printing.

  • Continuous printing on sheets with a width of 170 mm or smaller may decrease the printing speed depending on the temperature control of the fusing unit.