Loading Paper into the Interposer

Load paper on the side already printed (the front side). If you are using the Booklet Finisher (Saddle Stitch), load sheets print side down.

Load paper in the interposer in the same orientation as paper in the paper tray.

The staple or punching location will be on the left side of the paper, when you are facing the machine.

Do not place anything on top of or leave documents on the sensor. This may lead to the paper size not being correctly scanned or paper jams.

When using the Z-fold function, the paper in the interposer must be the same size as the prints after they have been Z-folded. If the paper in the interposer is larger than the Z-folded sheets, a misfeed might occur.

The tray can hold up to 200 sheets of paper. Do not stack paper over the limit mark.