Printer Features Menu

Multiple Lists

You can print the configuration page and error log.

Configuration Page

You can print the machine's current configuration values.

Error Log

You can print error logs listing all errors that occurred during printing.

Menu List

You can print a Menu List showing the machine's function menus.

PCL Configuration / Font Page

You can print the current PCL configuration and installed PCL font list.

PS Configuration / Font Page

You can print the current PS configuration and installed PostScript font list.

This menu can be selected only when the optional PostScript 3 unit is installed.

PDF Configuration / Font Page

You can print the current PDF configuration and installed PDF font list.

This menu can be selected only when the optional PostScript 3 unit is installed.

Hex Dump

You can print in the Hex Dump mode.

Menu Protect

This function lets you protect menu settings from accidental change. It makes impossible to change menu settings with normal procedures unless you perform the required key operations.

In a network environment, only administrators can make changes to menu settings.

List / Test Print Lock

You can lock the [List / Test Print] menu.

Delete All Temporary Print Jobs

You can delete all print jobs temporarily stored in the machine.

Delete All Stored Print Jobs

You can delete all print jobs stored in the machine.

4 Color Graphic Mode (4 Colour Graphic Mode)

You can adjust the image density.

Print Error Report

You can print an error report when a printer or memory error occurs.

Auto Continue

You can select this to enable Auto Continue.

When it is On, printing continues after a system error occurs.

Memory Overflow

Select this to have a memory overflow error report printed.

Job Separation

You can enable Job Separation.

This menu can be selected only when a finisher (optional) is installed.

Rotate by 180 Degrees

Specify whether to rotate the print image 180 degrees relative to the paper orientation.

Auto Delete Temporary Print Jobs

You can select to automatically delete print jobs temporarily stored in the machine.

Auto Delete Stored Print Jobs

You can select to automatically delete print jobs stored in the machine.

Initial Print Job List

You can set the default Printer screen when you press [Print Jobs].

Memory Usage

You can select the amount of memory used in Font Priority or Frame Priority, according to paper size or resolution.

Duplex

You can select to have print on both sides of each page.

Copies

You can specify the number of print sets.

This setting is disabled if the number of pages to print has been specified with the printer driver or another command.

Blank Page Print

You can select whether or not to print blank pages.

Spool Image

You can select to print spool images. The print job transmitted from the computer is temporarily stored on the machine's hard disk as bitmap images that can be printed when transmission is complete. If more than one print job is transmitted, a spool image is printed for each.

Reserved Job Waiting Time

You can specify how long the machine waits to receive a print job before allowing other functions such as the copier and scanner functions to interrupt it.

Printer Language

You can specify the printer language.

Sub Paper Size

You can enable the Auto Substitute Paper Size (A4LT) feature.

Page Size

You can select the default paper size.

Letterhead Setting

You can rotate original images when printing.

When printing, original images are always rotated by 180 degrees. Therefore, output might not be as expected when printing onto letterhead or preprinted paper requiring orientation.

Bypass Tray Setting Priority

You can specify which of the two options, (Printer) Driver / Command or Machine Settings, has priority for determining the paper size for the bypass tray.

Edge to Edge Print

You can select whether or not to print on the entire sheet.

Default Printer Language

You can set the default printer language if the machine cannot find the printer language automatically.

Tray Switching

You can set to switch the paper tray.

I/O Buffer

You can set the size of the I/O Buffer. Normally it is not necessary to change this setting.

I/O Timeout

You can set how many seconds the machine should wait before ending a print job. If data from another port usually arrives in the middle of a print job, you should increase this timeout period.

Orientation

You can set the page orientation.

Form Lines

You can set the number of lines per page.

Font Source

You can set the storage location of the default font.

Font Number

You can set the ID of the default font you want to use.

Point Size

You can set the point size you want to use for the selected font.

Font Pitch

You can set the number of characters per inch for the selected font.

Symbol Set

You can specify the set of print characters for the selected font.

Courier Font

You can select a courier font type.

Extend A4 Width

You can extend the printing area width when printing on A4 sheet with PCL.

Append CR to LF

When set to On, a carriage return will follow each line feed: CR=CR, LF=CRLF, FF=CRFF.

Resolution

You can set the print resolution in dots per inch.

Data Format

You can select a data format.

Resolution

You can set the print resolution in dots per inch.

Color Setting (Colour Setting)

You can make an RGB setting.

Color Profile (Colour Profile)

You can set the color profile.

Change PDF Password

You can set the password for the PDF file executing PDF Direct Print.

PDF Group Password

You can set the group password already specified with DeskTopBinder Lite.

Resolution

You can set the print resolution in dots per inch.

Color Setting (Colour Setting)

You can make an RGB setting.

Color Profile (Colour Profile)

You can set the color profile.