Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > General Settings Guide > System Settings > System Settings on Main and Sub-machines > Tray Paper Settings

Tray Paper Settings

The following list describes how the default Tray Paper Settings on the main and sub-machines will be applied during connect copy.

Paper Tray Priority: Copier

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Paper Tray Priority: Facsimile

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Paper Tray Priority: Printer

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Printer Bypass Paper Size

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Tray Paper Size: Tray 2 - 3

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

  • Both the main and sub-machines should have the same paper tray settings. Only paper trays with the same size, orientation and paper type can be used in Connect Copy mode.

Tray paper Size: LCT

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

  • Both the main and sub-machines should have the same paper tray settings. Only paper trays with the same size, orientation and paper type can be used in Connect Copy mode.

Tray Paper Size: Interposer Upper Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Tray Paper Size: Interposer Lower Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Paper Type: Bypass tray

  • The bypass tray can only be used with the Covers and Chapter functions.

Paper Type: Tray 2 - 3

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

  • Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.

Paper Type: LCT

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

  • Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.

Front Cover Sheet Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Back Cover Sheet Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Slip Sheet Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Destination Sheet 1 Tray, Destination Sheet 2 Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

Separation Sheet Tray

  • The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.

TopPreviousNext
Copyright (C) 2007