



	Manuals Contents Previous Next

Top Page > Troubleshooting > Adding Paper, Toner and Staples > Loading Paper > Loading Paper into the Wide Large Capacity Tray

Loading Paper into the Wide Large Capacity Tray

This section describes how to load paper into the Wide LCT.

Various regular sizes of paper can be loaded in the Wide LCT by adjusting the positions of side fences and end fence.
Check that the paper edges are aligned with the left side.
The tray can hold up to about 2,000 sheets of paper. Do not stack paper over the limit mark.

Carefully pull out the paper tray until it stops.
Load paper into the paper tray by pushing the paper to the left side of the paper tray.
Place paper with printing side up.
Carefully slide the paper tray fully in.