



	Manuals Contents Previous Next

Top Page > Troubleshooting > Adding Paper, Toner and Staples > Loading Paper > Loading Paper into Tray 2 and 3

Loading Paper into Tray 2 and 3

This section describes how to load paper into tray 2 and 3.

Various sizes of paper can be loaded in tray 2 and 3 by adjusting the positions of side fences and end fence.
Check the paper edges are aligned with the right side.
Each tray can hold up to 550 sheets of paper. Do not stack paper over the limit mark.

Carefully pull out the paper tray until it stops.
Square the paper and load it print side down.
Carefully push the paper tray fully in.