This section describes how to identify the machine's interface and connect the machine according to the network environment.
A network interface cable with a ferrite core must be used for RF interference suppression.
IEEE 1284 ports (optional)
Port for connecting the IEEE 1284 interface cable
Port for connecting the USB2.0 interface cable
Port for connecting the 100BASE-TX or 10BASE-T cable
Wireless LAN port (optional)
Port for using the wireless LAN
Gigabit Ethernet port (optional)
Port for using the 1000BASE-T, 100BASE-TX, or 10BASE-T cable
You cannot install these two options at the same time: IEEE 1284 interface board, wireless LAN board.
If the optional Gigabit Ethernet board is installed, only the Ethernet interface and USB interface on the Gigabit Ethernet board can be used.