Skip headerimage

Using the Standard TCP/IP port

This describes how to install the PCL or RPCS printer driver using the TCP/IP port.


Installing the PCL or RPCS Printer Driver

  1. Quit all applications currently running.

  2. Insert the CDhyphenROM into the CDhyphenROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

    The default interface language is English.

  4. Click [RPCS Printer Driver] or [PCL Printer Driver].

  5. The software license agreement appears in the [License Agreement] dialog box.

    After reading the agreement, click [I accept the agreement.], and then click [Next >].

  6. Select a printer driver you want to use in the [Select Program] dialog box.

    You can select several printer drivers.

  7. Click [Next >].

  8. Select the machine model you want to use.

    The printer name can be changed in the [Change settings for 'Printer Name'] box.

  9. Doublehyphenclick the printer name to display the printer settings.

    The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.

  10. Click [Port], and then click [Add].

  11. Click [Standard TCP/IP Port], and then click [OK].

    Configure the Standard TCP/IP port settings, and then see Windows Help if [Standard TCP/IP Port] does not appear.

  12. Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

  13. Enter the printer name or IP address in the [Printer Name or IP Address] box.

    The [Port Name] text box automatically obtains a port name. Change this name if necessary.

    When the device selection appears, select "RICOH NetworkPrinter Driver C Model".

  14. Click [Next >].

  15. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

    The installation start dialog box reappears.

  16. Check that the port of the selected printer is displayed in [Port].

  17. Configure the default printer as necessary.

  18. Click [Continue].

    The printer driver installation starts.

  19. After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

    Restart the computer to complete installation.