Skip header
 

Printing from a Selected Tray

If the machine does not have a tray for the selected paper size or paper type, or if the selected paper loaded in the machine has run out, a caution message appears. If this message appears, do the following procedure.

1Press the [Printer] key.

2Select the tray for form feed from those that appear on the control panel.

If you want to print after adding paper to the tray, select the tray after loading the correct paper.

3Press [Continue].

The machine prints using the selected tray.

Note

  • If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may occur.