Windows XP, Windows Server 2003 / 2003 R2 - USB
To install a printer driver, you must have Administrators privilege. Log on using an account that has Administrators privilege.
When USB is first used, Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
If the printer driver is already installed and plug and play is enabled, the icon of the printer connected to the "USB" port appears in the [Printers and Faxes] window.
The printer drivers can be installed from the CD
ROM provided with this machine.
If the printer driver is not already installed, follow the printer's plugandplay instructions to install it from the provided CDROM.
Connect the machine to the computer using a USB cable.
Connect the USB cable firmly.
In the [Found New Hardware Wizard] dialog box, click [Install the software automatically (Recommended)], and then click [Next >].
Insert the CDROM into the CDROM drive.
If Auto Run starts, click [Cancel], and then [Exit].
To disable Auto Run, press the left [Shift] key when inserting the CDROM into the drive and keep it pressed until the computer finishes reading from the CDROM.
Select the [Include this location in the search] check box under [Search for the best driver in these location], and then click [Browse] to select the printer driver location.
If the CDROM drive is D, the source files of the printer driver are stored in the following location:
RPCS
D:
DRIVERSRPCSXP_VISTA(Language)DISK1PCL 5e
D:
DRIVERSPCL5EXP_VISTA(Language)DISK1PCL 6
D:
DRIVERSPCL6XP_VISTA(Language)DISK1PostScript 3
D:
DRIVERSPSXP_VISTA(Language)DISK1
Check the printer driver location, and then click [Next >].
Click [Continue].
Click [Finish].
If the installation is successful, the icon of the printer connected to the "USB001" port appears in the [Printers and Faxes] window.
The number after "USB" varies depending on the number of printers that the computer is connected to.
