Installing the PostScript 3 Printer Driver (Windows 95 / 98 / Me)
If you print from a print server connected to the printer using the DeskTop Binder-SmartDeviceMonitor port, the client cannot use Recovery Printing and Parallel Printing.
You can install the printer driver from the CD-ROM provided with this machine or download it from the supplier's Web site.
If your operating system is Windows 95 / 98 / Me, you must download the printer driver from the manufacturer's Web site. Select this printer and the operating system you are using, and then download it.
Download the PostScript 3 printer driver from the supplier's web site.
Use a search to find the name of your model, and then download the PostScript 3 printer driver from the supplier's web site.
Save it where you can locate it easily.
[Saved file] is a self-extracting file. You must extract it beforehand. The [Saved file] folder is created afterwards.
Click the [Saved file] folder, and then click [Disk1].
Double-click [SETUP.EXE].
Add Printer Wizard starts.
Click [Next >].
Click [Network printer], and then click [Next >].
Click [Browse].
Click the computer name you want to use as a print server in the [Browse for Printer] window.
Select the printer you want to use, and then click [OK].
Check the location of the selected printer is shown, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Specify whether or not to print a test page, and then click [Finish].
Restart the computer.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
