Specifications for the Main Unit
This section describes specifications for the main unit.
Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Heating roll pressure system
Resolution:
Scanning originals: 600 dpi
Printing: 600 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C, rated voltage):
Main power switch: 18 seconds or less
Operation switch:
Type 1: 10 seconds or less
Type 2: 15 seconds or less
Originals:
Sheet/book/objects
Maximum original size:
A3
, 11 × 17
Paper size:
Trays: A3
- A5
, 11 × 17 - 71/4 × 101/2Bypass: A3
- A6, 12 × 18 - 51/2 × 81/2Bypass (custom size):
Vertical: 90.0 - 305.0 mm, 3.55 - 12.00 inches
Horizontal: 148.0 - 600.0 mm, 5.83 - 23.62 inches
Duplex: A3
- A5, 11 × 17 - 71/4 × 101/2
Paper weight:
Trays: 60 - 169 g/m2, 16 - 45 lb.
Bypass: 52 - 220 g/m2, 14 - 58 lb.
Duplex: 60 - 169 g/m2, 16 - 45 lb.
Non-reproduction area (Copier):
Leading edge: 1.0 - 5.0 mm, 0.04 - 0.2 inches
Trailing edge: 0.0 - 4.0 mm, 0.00 - 0.2 inches
Left edge: 0.5 - 3.5 mm, 0.02 - 0.14 inches
Right edge: 0.5 - 4.5 mm, 0.02 - 0.18 inches
First copy/print time:
Type 1: 4.1 seconds or less
Type 2: 3.5 seconds or less
(A4
, 81/2 × 11, 100% reproduction, feeding from Tray 1, on the exposure glass)
Copying speed:
Type 1: 40 copies/minute (A4
, 81/2 × 11)Type 2: 50 copies/minute (A4
, 81/2 × 11)
Reproduction ratio:
Preset reproduction ratios:
Enlargement
Metric version
Inch version
400%
400%
200%
200%
141%
155%
122%
129%
115%
121%
Full size
Metric version
Inch version
100%
100%
Reduction
Metric version
Inch version
93%
93%
82%
85%
75%
78%
71%
73%
65%
65%
50%
50%
25%
25%
Zoom: From 25 to 400% in increments of 1%
Maximum continuous copy run:
999 sheets
Paper capacity (80 g/m2, 20 lb.):
Trays 1, 2: 550 sheets
Bypass tray: 100 sheets
Power consumption:
Main unit only
Type 1
Type 2
Warm-up
About 1.39 kW
About 1.39 kW
Stand-by
About 155 W
About 165 W
During printing
About 0.78 kW
About 0.88 kW
Maximum
Less than 1.39 kW
Less than 1.39 kW
Complete system
Type 1
Type 2
Warm-up
About 1.41 kW
About 1.41 kW
Stand-by
About 180 W
About 190 W
During printing
About 0.94 kW
About 1.02 kW
Maximum
Less than 1.41 kW
Less than 1.41 kW
The complete system consists of the main unit, ADF, internal tray 2, paper tray unit, bridge unit, 2 tray finisher, LCT, fax unit and printer/scanner unit.
The measurements are actual values.
Dimensions (W × D × H up to exposure glass, with paper tray unit):
Types 1, 2: 670 × 677 × 1020 mm, 26.4 × 26.7 × 40.2 inches
Space for main unit (W × D):
Types 1, 2: 670 × 677 mm, 26.4 × 26.7 inches
Noise emission:
Sound power level:
Main unit only
Type 1
Type 2
Stand-by
35.9 dB (A)
35.6 dB (A)
Copying
65.6 dB (A)
68.2 dB (A)
Complete system
Type 1
Type 2
Stand-by
36.2 dB (A)
36.2 dB (A)
Copying
71.8 dB (A)
72.3 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Stand-by
24.6 dB (A)
22.7 dB (A)
Copying
52.4 dB (A)
56.0 dB (A)
Complete system
Type 1
Type 2
Stand-by
22.3 dB (A)
20.6 dB (A)
Copying
61.2 dB (A)
61.3 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound power level and sound pressure level are measured from the position of the bystander.
The complete system consists of the main unit, ADF, lower paper trays, large capacity tray (LCT), and 3000-sheet finisher.
Weight:
Types 1, 2: Approx. 85 kg, 187.4 lb.
