



	Manuals Contents Previous Next

Top Page > General Settings Guide > Registering Addresses and Users for Facsimile/Scanner Functions > Registering Folders > Using SMB to Connect > Locating the SMB folder manually

Locating the SMB folder manually

This section describes how to locate the SMB folder manually.

Press [Change] under "Path".
Enter the path where the folder is located.
Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the path again.

Enter the path using this format: "\\ServerName\Share- Name\PathName".
You can also enter an IPv4 address.
You can enter a path using up to 128 characters.