Skip header
ManualsContentsPreviousNextHelp

Status Messages

This section describes the machine status messages.

Message

Status

"Hex Dump Mode"

In the Hex Dump mode, the machine receives data in hexadecimal format. Turn off the machine after printing, and then turn back on.

"Job Suspended..."

All jobs in the machine are suspended. Wait a while.

"Offline"

The machine is offline. To start printing, switch the machine online by pressing [Online].

"Please wait."

This message might appear for a second or two while the machine is preparing, performing initial adjustments, or adding toner. Wait a while.

"Ready"

This is the default ready message. The machine is ready for use. No action is required.

"Resetting job..."

The machine is resetting the print job. Wait until "Ready" appears on the display panel.

"Setting change..."

The machine is setting changing. You cannot use the control panel while this message is displayed. Wait a while.

"Waiting..."

The machine is waiting for the next data to print. Wait a while.