Adjusting the Volume

This section describes how to adjust the volume.

You can change the volume of the following sounds that the machine makes.

On Hook Mode

Heard when [On Hook] is pressed.

At Transmission

Heard when “Immediate Transmission” is performed.

At Reception

Heard when the machine receives a document.

At Dialing

Heard after pressing the [Start] key, until the line connects to the destination.

At Printing

Heard when a received document is printed.

Press the [User Tools / Counter] key.
Press [Facsimile Features].
Check that [General Settings] screen appears.
Press [Adjust Sound Volume].
Press [Lower] or [Louder] to adjust the volume, and then press [OK].
You can hear the actual volume by pressing [Check].
If you press [Cancel], the volume setting is canceled. The display returns to that of step 4.
You can set the volume level to between 0 and 7.
Press the [User Tools / Counter] key.
The standby display appears.

You can adjust the On Hook volume when you press [On Hook]. See “On Hook Dial”, Facsimile Reference.