![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
You can print documents sent from Specified Senders on paper from the bypass tray.
In “Program Special Sender” in the Facsimile Features menu, set as follows:
Program a special sender and select the Bypass Tray for the paper tray type.
Turn on the “Special Reception Function” in “Initial Set Up”.
For details about Program Special Sender, see “Facsimile Features”, General Settings Guide.
To use this function, the optional bypass tray is required.
You can load a maximum of 100 sheets of standard paper in the bypass tray.
You can use a size of paper not loaded in the paper tray(s) in the bypass tray.
The machine can detect A6, B6 JIS
, A5
, B5 JIS
, A4
, B4 JIS
, A3
(81/2 × 11
, 8 × 13
, 10 × 15
, 11 × 17
) paper sizes. When you load any other size, specify the paper size. However, if the specified paper size and size of paper set in the bypass tray do not match, paper jams may occur, or the image may be shortened.
Documents printed on paper smaller than A4 may be shortened, or split across sheets.
Paper longer than 600 mm may be creased, not sent, or jam.
Print area depends on optional expansion memory, resolution, and vertical length of originals.
If you use this function, Image Rotation and 180-degree rotating printing are not possible.