![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
You can check the results of transmission to Receiving Stations. The machine prints this report when it has finished transmitting to Receiving Stations.
You can select whether the SUB Code Transfer Report be automatically printed using the User Parameter (switch 04, bit 1) in the Facsimile Features menu.
You can set whether a portion of the original image is printed on the report with the User Parameter (switch 04, bit 7) in the Facsimile Features menu.
For details about Parameter Setting, see “Facsimile Features”, General Settings Guide.
“Unprogrammed” indicates the document could not be sent because the end receiver is not programmed.
“--” indicates that the e-mail or Internet Fax document was sent to the mail server programmed in this machine.
For the maximum number of destinations you can register in a group, see “Maximum Values”.