This function erases the centre and/or all four sides of the original image.
This function has the following three types:
Erase Border
Erases the edge margin of the original image.
Erase Centre
Erases the centre margin of the original image.
Erase Centre/Border
Erases both the centre and edge margins of the original image.
The relationship between the original orientation and the erased part is as follows:
|
|
---|---|
Erased part
2 - 99 mm (0.1 - 3.9 inches)
To erase the image on the back side of the original, press [2 Sided Setting] and then [Back]. Erasing the image on the back side is valid when you copy 2-Sided originals.
The erase width is set to 10 mm (0.4 inch) as a default. You can change this setting under Edit in User Tools. For details about Edit, see “Copier/Document Server Features”, General Settings Guide.