Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This section explains settings for scanning multiple originals in several batches.
To scan the originals as a single file, select [Batch].
To scan the originals individually in the ADF, select [SADF].
If you select [Batch], scanning starts as soon as you place the additional originals and press the [Start] key. When all the originals have been scanned, press [
]. If you select [Batch], regardless of the default settings, the machine waits until additional originals are placed.
If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF. Select which operation the machine performs while waiting for additional originals in [Wait Time for Next Original(s): SADF] under [Scanner Features]. For details about [Wait Time for Next Original(s): SADF], see "Scanner Features", General Settings Guide.
Press [Original Feed Type].
Select [Batch] or [SADF].
Press [OK].
For more details about procedures, see "Scanning Multiple Pages of Originals as One File".
If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF. However, in the following cases you must press the [Start] key to start scanning additional originals.
After scanning additional originals using the exposure glass
After changing settings while waiting for additional originals
After opening/closing the ADF
 |
 | Copyright (C) 2007 |
