Skip headerimage
ManualsContentsPreviousNextHelp

Windows 2000 - USB

Important

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the “USB” port is added to the [Printers] window.

If the printer driver is not installed, follow the plug-and-play instructions of the printer to install it from the CD-ROM provided.

  1. Connect the machine to the computer using the USB cable.

    Connect the USB cable firmly.

  2. In the Found New Hardware Wizard display, click [Search for a suitable driver for my device [recommended]], and then click [Next >].

  3. Select the [Specify location] check box, and then click [Next >].

  4. Insert the CD-ROM into the CD-ROM drive.

  5. When Auto Run starts, click [Exit].

    To disable Auto Run, press the left [Shift] key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

  6. Specify the location where the source files of the printer driver is stored.

    If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

    • PostScript 3

      D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1

  7. Check the printer driver location, and then click [OK].

  8. Click [Next >].

  9. Click [Finish].

    If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the “USB001” port is added to the [Printers] window.

Note