Specifications

This section contains the machine's electrical and hardware specifications, including information about its options.

Component	Specifications
Resolution	600 × 600 dpi
Printing speed	Type 1: 25 ppm (A4, 8¹/₂" 11" plain paper) Type 2: 33 ppm (A4, 8¹/₂" 11" plain paper) Printing speeds depend on the machine. Check which type of machine you have. See General Settings Guide.
Interface	Standard: Ethernet interface (100BASETX / 10BASET) USB 2.0 interface Option: Giga Ethernet Interface (1000BASETX, 100 BASETX, 10 BASET) IEEE 1284 parallel interface Use a standard 36pin printer cable not longer than 3 meters (10 feet). IEEE 802.11a/b/g or IEEE 802.11 b/g wireless LAN interface Bluetooth interface
Network protocol	IPv4, IPv6, IPX/SPX, AppleTalk
Printer language	Standard: PCL 6/5e, RPCS Option: PostScript 3, PDF
Fonts	PCL 6/5e: Monotype Imaging 35 Intellifonts, 10 TrueType fonts, 13 International fonts. PostScript 3: 136 fonts (Type 2:24, Type 14:112)
Memory	512MB
Hard disk	Storage capacity: 40 GB
USB Interface (Standard)	Supported Operating System: Windows Me / 2000 / XP / Vista, Windows Server 2003 / 2003 R2, MacOS 10.3.3 or later Transmission spec. USB 2.0 Standard Connectable Device: Devices corresponding to USB 2.0 Standard

When using Mac OS, use only the standard USB Interface. The optional USB interface board is not supported.
When using the USB Interface (Standard) with Mac OS 10.3.3, USB2.0 is supported.
When using the USB Interface (Standard) with Windows Me, install USB Printing Support. Windows Me only supports USB 1.1 speed.