Skip headerimage
ManualsContentsPreviousNextHelp

Setting Thick Paper, Thin Paper, or OHP Transparencies Using the Control Panel

Follow the procedure below to set the machine using the control panel when loading thick paper, thin paper, or OHP transparencies onto the bypass tray.

Important

  1. Press the [User Tools/Counter] key on the control panel.

    User Tools/Counter key illustration

  2. Press [System Settings].

  3. Press the [Tray Paper Settings] tab.

  4. Press [Down arrow keyNext] to scroll through the list.

  5. Press [Paper Type: Bypass Tray].

    Operation panel screen illustration

  6. Select the proper items, according to the paper type you want to set.

    Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies. Press [Thick Paper] or [Thin paper] when loading thick paper or thin paper.

    Operation panel screen illustration

  7. Press [OK].

    The paper type selected is displayed.

  8. Press the [User Tools/Counter] key.

    The initial screen appears.

Note