Skip headerimage
ManualsContentsPreviousNextHelp

Before the Transmission Is Started

Use this procedure to cancel a transmission after the original is scanned.

This function is useful to cancel a transmission when you notice a mistake in destination or with the originals after storing. To cancel Memory Transmission, search for the file to be canceled among the files stored in memory, and then delete it.

You can cancel transmission of a file while the file is being sent, stored in memory, or fails to transmit. All the scanned data is deleted from memory.

Important

  1. Press [Change TX / Info].

    Operation panel screen illustration

  2. Press [Check / Stop Transmission File].

    Operation panel screen illustration

    The list of stored files being transmitted or waiting for transmission appears.

    To display only the files being sent, press [Files under TX].

  3. Select the file you want to cancel.

    Operation panel screen illustration

    If the desired file is not shown, press [Up arrow key] or [Down arrow key] to find it.

    There are cases when a destination may not be selected as the destination appears as “Asterisk”, depending on the security settings.

  4. Press [Stop Transmission].

    Operation panel screen illustration

  5. Press [OK].

    Operation panel screen illustration

    To cancel another file, repeat steps 3 through 5.

    To cancel stopping transmission, press [Cancel].

  6. Press [Exit] twice.

    Operation panel screen illustration

    The standby display appears.

Note

Reference