When placing an original on the exposure glass

This section explains how to place an original on the exposure glass.

If you place an original larger than A3, 11 × 17 on the exposure glass, only an A3, 11 × 17 area is scanned.

Maximum scan area
The following shows the maximum scan area:
297 × 432 mm, 11 × 17 inches (W × L)

The machine detects paper sizes in the following ways:

Metric Version

Illustration of the table for original size detection

Inch Version

Illustration of the table for original size detection

× - Unable to auto detect

*1 Normally a length of about 420 mm (16.5 inches) can be scanned; however, it is only possible to specify a scanning size up to 432 mm (17 inches).

If the machine cannot detect the size of the original you placed, specify the scan area (original size) manually. For details about specifying the scan area, see “Scan Size”.