Skip headerimage
ManualsContentsPreviousNextHelp

LDAP Authentication

This section describes how to register LDAP Authentication.

For each user registered in the Address Book, you can register a login user name and login password to be used when accessing an LDAP server.

To use an LDAP server, you need to program it beforehand. For details, see "Programming the LDAP server".

Important

  1. Press [System Settings].

    Operation panel screen illustration

  2. Press [Administrator Tools].

  3. Press [Address Book Management].

  4. Check that [Program / Change] is selected.

  5. Press the name you want to register or enter the registered number using he number keys.

    If you press [Search], you can search by the registered name, fax number, folder name, e-mail address, or IP-Fax destination.

  6. Press [Auth. Info], and then press [Down arrow keyNext].

  7. Press [Specify Other Auth. Info] under "LDAP Authentication".

  8. Press [Change] under "Login User Name".

    Operation panel screen illustration

  9. Enter the login user name, and then press [OK].

  10. Press [Change] under "Login Password".

  11. Enter the password, and then press [OK].

  12. Enter the password again to confirm, and then press [OK].

  13. Press [OK].

  14. Press [Exit].

  15. Press the [User Tools/Counter] key.

Note

Reference