General Settings

Letterhead Setting

You can select the letterhead printing mode.

Letterhead 1, Letterhead 2, Letterhead 3

Default: Letterhead 1

Label Paper Setting

You can select the label paper printing mode.

Label Paper 1, Label Paper 2, Label Paper 3

Default: Label Paper 1

Envelope Setting

You can select the envelope printing mode.

Bypass Tray
Envelope 1, Envelope 2, Envelope 3

Default: Envelope 1

Replacement Alert

Use this function to specify the timing to notify user when supplies need to be replaced. Settings can be made separately for photo conductor unit, intermediate transfer unit, or fusing unit.

Maintenance Kit A
Notify Sooner, Normal, Notify Later
- Default: Normal
Maintenance Kit B
Notify Sooner, Normal, Notify Later
- Default: Normal

Supply End Option

Use this function to specify the whether or not to continue printing when the following supplies end: photo conductor unit, intermediate transfer unit, fusing unit.

Continue Printing
Stop Printing

Default: Continue Printing

Display Supply Info

You can select whether or not to display the amount of toner on the initial screen.

Default: On

Menu Protect

You can select whether or not to protect menu. When you enable this setting, specify protection level.

Level 1
Level 2
Off

Default: Level 2
If you would like to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.

List/Test Print Lock

You can select whether or not to prohibit List/Test printing.

Default: Off
You may not be able to change this setting depending on the setting of the printer.

Warm-up Beeper

You can select whether or not to sound the beeper when the printer has completed a warm-up process.

Default: On

Display Contrast

You can specify the density of the display.

Key Repeat

You can specify whether or not to scroll the display panel when the [] or [] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)

Do not Repeat
Normal
Repeat Time: Medium
Repeat Time: Long

Default: Normal