Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This section explains about parameters that can be set on the paper input menu.
Paper Size: Bypass Tray
You can specify the paper size for Bypass Tray.
: Auto Detect,A3
, A4
, A5, A6 B4 JIS, B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env., 12" × 18", 11" × 17", 81/2" × 14", 81/2" × 13", 81/2" × 11", 81/4" × 13", 8" × 13", 71/4" × 101/2", 51/2" × 81/2", 41/8" × 91/2", 37/8" × 71/2", Custom Size
: Auto Detect, 12" × 18", 11" × 17", 81/2" × 14", 81/2" × 13", 81/2" × 11", 81/4" × 13", 8" × 13", 71/4" × 101/2", 51/2" × 81/2", 41/8" × 91/2", 37/8" × 71/2", A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env., Custom Size
Default:
: Auto Detect
: Auto Detect
Paper Size: Tray 1 to 4
You can specify the paper size for Tray 1 to 4.
: Auto Detect, A3, A4, A5, B4 JIS, B5 JIS, 11" × 17", 81/2" × 14", 81/2" × 13", 81/2" × 11", 81/4" × 13", 8" × 13", 71/4" × 101/2", Custom Size
: Auto Detect, 11" × 17", 81/2" × 14", 81/2" × 13", 81/2" × 11", 81/4" × 13", 8" × 13", 71/4" × 101/2", A3, A4, A5, B4 JIS, B5 JIS, Custom Size
Default:
: Auto Detect
: Auto Detect
Only installed trays appear on the display panel.
Paper Type: Bypass Tray
No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3, Colour Paper, Letterhead, Label Paper, OHP (Transparency), Envelope, Preprinted Paper, Bond Paper, Cardstock, Thin Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Thick 1: Dup.Back, Thick 2: Dup.Back, Thick 3:Dup.Back, +Custom1, +Custom2, +Custom3, +Custom4, +Custom5, +Custom6, +Custom7, +Custom8
Default : No Display (Plain Paper)
For details about the types of paper that can be loaded in the Bypass Tray, see Hardware Guide.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
Paper Type: Tray 1 to 4/LCT
No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3, Colour Paper, Letterhead, Label Paper, Preprinted Paper, Bond Paper, Cardstock, Thin Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Thick 1:Dup.Back, Thick 2:Dup.Back, Thick 3:Dup.Back, +Custom1, +Custom2, +Custom3, +Custom4, +Custom5, +Custom6, +Custom7, +Custom8
Default : No Display (Plain Paper)
For details about the types of paper that can be loaded in each tray, see Hardware Guide.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
Only installed trays appear on the display panel.
Duplex Tray
You can set each tray for duplex printing.
Tray 1 to Tray 4/LCT
On
Off
Default : On
Only installed trays appear on the display panel.
Auto Tray Select
You can select whether to assign each tray to automatically print the paper size and type set by printer driver.
Default : On
When using custom size paper, if automatic tray selection is enabled, the size selected on the control panel has priority. If this setting is disabled, the size selected from the printer driver has priority.
Only installed trays appear on the display panel.
You can select multiple trays.
If you need to have a tray locked, you must select the tray using both printer driver and control panel.
Tray Priority
You can set a tray to be checked first when automatic tray selection is enabled from the printer driver. The tray selected here is used when no tray is selected for a print job.
Default : Tray 1
Only installed trays appear on the display panel.
It is recommended that you load paper of the size and orientation you use most frequently in the tray selected in this setting.
JIS stands for "Japanese Industrial Standard".
 |
 | Copyright (C) 2007 |
