Skip headerimage
ManualsContentsPreviousNextHelp

Cleaning the Registration Roller

If types of paper other than the standard types are used, specks of paper may stick around the registration roller, causing problems. Clean the registration roller if white dots appear on prints.

CAUTION

Important

  1. Turn off the printer and unplug the power cord.

  2. Push up the lever on the right side, and open the printer's right cover carefully.

    Right cover illustration

    The registration roller is installed as shown below.

    Interior illustration

  3. Clean the registration roller by applying a soft damp cloth while turning it.

    Interior illustration

  4. Close the right cover.

  5. Plug in the power cord and turn on the printer.