Skip headerimage
ManualsContentsPreviousNextHelp

When the 1000-sheet Finisher is Installed

  1. Open the finisher front cover.

    1000-sheet finisher illustration

  2. Lift the staple unit.

    Staple illustration

  3. Hold and lift the lever on the cartridge and pull the cartridge gently out of the staple unit.

    Staple illustration

  4. Pushing both sides of the cartridge, pull out the upper unit.

    Staple illustration

  5. Take out the empty staple case.

    Staple illustration

  6. Push the new case into the cartridge until it clicks.

    Staple illustration

  7. Lower the upper unit carefully.

    Staple illustration

  8. Pull the ribbon out of the staple case that you attached.

    The ribbon rolls around the staple case. Make sure to pull it out completely.

    Staple illustration

  9. Holding the lever on the cartridge, push the cartridge down gently into the staple unit until it clicks.

    Staple illustration

  10. Return the staple unit to its original position.

  11. Close the front cover of the finisher.

Note