Skip headerimage
ManualsContentsPreviousNextHelp

Adding Toner

WARNING

CAUTION

Important

Replace the toner when the following message appears on the display:

Operation panel screen illustration

When the following message appears on the display, the toner should be replaced soon. Prepare a new toner.

Operation panel screen illustration

  1. Holding the left and right side grips, carefully open the front cover.

    Front cover illustration

  2. Turn the green handle counterclockwise until it clicks into place.

    Interior illustration

  3. Pushing the green locking lever down, pull out the toner holder carefully by the handle until it stops.

    Toner illustration

  4. Slide the toner slightly towards the printer, raise its top, and then take it out of the holder carefully.

    Toner illustration

    Do not shake the removed toner. Any remaining toner may leak.

    Pull the toner out carefully to prevent leakage.

    Place the used toner on paper or some other material to avoid dirtying your workspace.

  5. Take the new toner out of the box.

  6. Shake the new toner back and forth five or six times.

    Toner illustration

    Even distribution of toner improves print quality.

  7. Remove the black cap of the new toner by turning it counterclockwise.

    Toner illustration

    Do not shake or jar the toner after removing the black cap as toner can scatter easily.

  8. Put the toner onto the toner holder in angle (image), place it flat on the toner holder, and then slide it towards you to secure it in place (image).

    Toner illustration

  9. Push the toner holder back in carefully until it clicks into place.

    Toner illustration

    Do not push in and remove the holder repeatedly. Doing so results in toner leak.

  10. Turn the green handle clockwise until it clicks into place.

    Confirm that the holder is secured with the green locking lever.

    Interior illustration

  11. Carefully close the front cover.

    Wait until "Please wait." disappears from the display.

Note