Skip headerimage
ManualsContentsPreviousNextHelp

Setting custom size paper

Important

  1. Press the [Menu] key.

    Menu key illustration

  2. Press the [Down arrow key] or [Up arrow key] key to select [Paper Input], and then press the [OK] key.

    Operation panel screen illustration

  3. Press the [Down arrow key] or [Up arrow key] key to select [Paper Size: Bypass Tray,] and then press the [OK] key.

    Operation panel screen illustration

  4. Select [Custom Size] using the scroll keys, and then press the [OK] key.

    Operation panel screen illustration

  5. Press the [Down arrow key] or [Up arrow key] key to enter the horizontal value, and then press the [OK] key.

    Operation panel screen illustration

    If you press and hold the key, the value increases/decreases by 1 or 10 mm.

  6. Press the [Down arrow key] or [Up arrow key] key to enter the vertical value, and then press the [OK] key.

    Operation panel screen illustration

    If you press and hold the key, the value increases/decreases by 1 or 10 mm.

    The settings appear and about two seconds later, the display returns to the [Paper Input] screen.

  7. Press the [Menu] key.

    The display returns to the initial screen.

Note