Skip headerimage
ManualsContentsPreviousNextHelp

Setting Items of WPA/WPA2

  1. Start your Web browser.

  2. Enter "http://(printer's address)/" in the address bar of a Web browser.

  3. Enter your user name and password, and then click [Login].
    For details about the login user name and password, consult your administrator.

  4. Click [Configuration], and then click [Wireless LAN Settings] in the “Interface” area.

  5. Select [Infrastructure Mode] in “Communication Mode”.

  6. Enter the alphanumeric characters (a-z, A-Z, or 0-9) in [SSID] according to the access point you want to use.

  7. Select [WPA] in “Security Method”.

  8. Select [TKIP] or [CCMP (AES)] in “WPA Encryption Method” according to the access point you want to use.

  9. Select [WPA] or [WPA2] in “WPA Authentication Method”.

  10. In “User Name”, enter the user name set in the RADIUS server.

  11. Enter the domain name in “Domain Name”.

  12. Select “EAP Type”. Configurations differ according to the EAP Type.

    EAP-TLS

    • Make the following settings according to the operating system you are using:

      • Select the client certificate you want to use in "WPA Client Certificate".

      • Select [On] or [Off] in “Authenticate Server Certificate”.

      • Select [On] or [Off] in “Trust Intermediate Certificate Authority”.

      • Enter the host name of the RADIUS server on “Server ID”.

      • Select [On] or [Off] in “Permit Sub-domain”.

    LEAP

    • Click [Change] in “Password”, and then enter the password set in the RADIUS server.

    EAP-TTLS

    • Click [Change] in “Password”, and then enter the password set in the RADIUS server.

    • Click [Change] in “Phase 2 User Name”, and then enter the user name set in the RADIUS server.

    • Select [CHAP], [MSCHAP], [MSCHAPv2], [PAP], or [MD5] in “Phase 2 Method”.

    • Certain methods might not be available, depending on the RADIUS server you want to use.

    • Make the following settings according to the operating system you are using:

      • Select [On] or [Off] in “Authenticate Server Certificate”.

      • Select [On] or [Off] in “Trust Intermediate Certificate Authority”.

      • Enter the host name of the RADIUS server in “Server ID”.

      • Select [On] or [Off] in “Permit Sub-domain”.

    PEAP

    • Select [MSCHAPv2] or [TLS] in “Phase 2 Method”.

    • When you select [TLS], select the client certificate you want to use in “WPA Client Certificate”.

    • When you select [MSCHAPv2],

      • click [Change] in “Password”, and then enter the password set in the RADIUS server.

      • click [Change] on “Phase 2 User Name”, and then enter the user name set in the RADIUS server.

    • Make the following settings according to the operating system you are using:

      • Select [On] or [Off] in “Authenticate Server Certificate”.

      • Select [On] or [Off] in “Trust Intermediate Certificate Authority”.

      • Enter the host name of the RADIUS server on “Server ID”.

      • Select [On] or [Off] in “Permit Sub-domain”.

  13. Click [OK].

  14. Click [Logout].

  15. Quit the Web browser.

Note