Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
For users outside the United States of America: properly shielded and grounded cables and connectors must be used for connections to a host computer (and/or peripheral) in order to meet emission limits.
For users in the United States of America: properly shielded and grounded cables and connectors must be used for connections to a host computer (and/or peripheral) in order to meet FCC emission limits.
USB connection is possible under Windows 2000/XP/ Vista, Windows Server 2003/2003 R2, Mac OS 9.x, and Mac OS X.
USB connection with Mac OS is only possible via the printer's USB port, not the Gigabit Ethernet board's USB port.
A USB cable is not supplied with this printer. Select your cable according to the computer.
The printer's USB port is not available when the Gigabit Ethernet board is attached to the printer.
Connecting to the standard USB port
Connect the square-shaped connector of the USB cable to USB port B on the left side of the printer.
Connect the opposite end's flat connector to the desired device such as your computer's USB interface, or a USB hub.
Connecting to the USB port of the Gigabit Ethernet board
Connect the square-shaped connector of the USB cable to the USB port of the Gigabit Ethernet board.
Connect the opposite end's flat connector to the desired device such as your computer's USB interface, or a USB hub.
"Installing the Printer Driver Using USB", Software Guide
 |
 | Copyright (C) 2007 |
