Where to Install Options

1000-sheet paper feed unit

Attach to the underside of the printer. See “Attaching the Paper Fed Unit”.

2000-sheet paper feed unit

Attach to the underside of the printer. See “Attaching the Paper Fed Unit”.

1200-sheet paper feed unit

Attach to the right side of the 1000-sheet paper feed unit or 2000-sheet paper feed unit.

To attach this option, contact your sales or service representative.

Bridge unit

Remove the output tray and attach the bridge unit.

To attach this option, contact your sales or service representative.

1000-sheet finisher

Attach to the left side of the printer.

• *1: Finisher upper tray

• *2: Finisher shift tray

To attach this option, contact your sales or service representative.

2 Tray finisher

Attach to the left side of the printer.

• *3: Finisher upper tray

• *4: Finisher shift tray

To attach this option, contact your sales or service representative.

Output jogger unit

Attach to the 2 tray finisher.

To attach this option, contact your sales or service representative.

Data overwrite security unit/data storage card/IPDS unit/HDD encryption unit

If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or service representative.

• Upper slot: data overwrite security unit, data storage card, or IPDS unit

• Lower slot: HDD encryption unit or VM card

See “Installing SD Card Options”.

Optional interface board

Only one interface board can be installed.

• Gigabit Ethernet board

• IEEE 1284 interface board

• IEEE 802.11 g interface board

• IEEE 802.11 a/g interface board

See “Installing the Interface Units”.

SDRAM module

See "Installing the Memory Expansion Units".

Hard disk

See "Installing the Memory Expansion Units".