Skip headerimageimage
ContentsPreviousNextHelp

Machine Body

This is a front view of the machine.

layout

  1. Scanner unit

    Open this to access the envelope selector and the shipping lock. Keep it closed during printing. If paper jams occur, raise the scanner unit to remove jammed paper.

  2. Envelope selector

    For envelopes, set the lever to the rear position image; for everything else, set the lever to the forward position Portrait.

  3. Print cartridge (yellow)

  4. Print cartridge (magenta)

  5. Print cartridge (cyan)

  6. Print cartridge (black)

  7. Right front cover

    Keep this cover closed during printing. Open to install or replace print cartridges.

  8. Tray 1

    Load paper here.

  9. Output tray extension

    Pull this out to prevent copies falling.

  10. Paper output tray

    Prints are delivered here.

  11. Shipping lock

    Use this to lock the interior of the scanner unit when moving the machine.

  12. Scanner unit release lever

    Pull this lever to lift the scanner unit.

  13. Exposure Glass Cover

    Lower this cover over originals.

  14. Exposure glass

    Place originals face down here for copying.