Skip headerGelSprinter GX7000
ContentsPreviousNextHelp

Top Page > Maintaining > Performing Maintenance using the Control Panel (Maintenance Menu) > Nozzle Check

Nozzle Check

Follow the procedure below to check whether the print-head nozzles are clogged up or not by printing a nozzle check test pattern.

  1. Press the [Menu] key.

    image

  2. Press the [Up arrow key] or [Down arrow key] key to display [Maintenance], and then press the [#Enter] key.

    Menu:           
     Maintenance    

  3. Press the [Up arrow key] or [Down arrow key] key to display [Nozzle Check], and then press the [#Enter] key.

    Maintenance:    
     Nozzle Check   

  4. Press the [#Enter] key.

    Press # to      
    print pattern   

    A test pattern is printed.

  5. Press the [Online] key.

    The initial screen appears.

  6. Check the printed test pattern.

    Normal

    image

    When print-heads are clogged

    image

TopPreviousNext
Copyright (C) 2007