Specifying System Settings using the Control Panel (System Menu)

You can specify how the printer handles a print job if it does not have a tray containing paper of the size and type specified in the printer driver.

• Off

  The printer does not print until a tray containing paper of the size and type required for the print job is inserted.

• Immediate

  The printer prints even if the paper size or paper type is different from that specified.

Default: Off

You can specify whether to print on A4 paper if the printer is not equipped with a paper tray that can feed Letter (8 ¹/₂×11) paper specified on the printer driver, and vice versa.

• Auto

• Off

Default: Off

Use Energy Saver mode to reduce the printer's power consumption.

You can specify how long the printer remains idle before it switches to Energy Saver mode. When the printer is in Energy Saver mode, it requires time to start up when it receives a print job.

• 5 minutes

• 15 minutes

• 30 minutes

• 45 minutes

• 60 minutes

Default: 5 minutes

You can specify whether or not to send notification that a printer error has occurred to a particular e-mail address.

After changing this setting, turn the printer off and then back on.

• Off

• On

Default: Off

You can switch the measurement between “mm” and “inch”.

• mm

• inch

: Default: mm

: Default: inch

You can reset the ink storage counter when replacing the ink collector unit.

You can specify whether or not to enable the Env.Slctr.Alert function.

• Display Alert

If you attempt bidirectional printing on sheets when the envelope selector is in the (rear) position, printing does not begin and an error message notifying you that the envelope selector is incorrectly set will appear.

• No Alert & Prnt

Regardless of the envelope selector position, the printer ignores the error and continues printing.

Default: Display Alert