Skip headerGelSprinter GX7000
ContentsPreviousNextHelp

Top Page > Read This First > Options > Multi Bypass Tray BY1010 > Detaching and Reattaching the Multi Bypass Tray

Detaching and Reattaching the Multi Bypass Tray

To clear a paper jam, you might have to detach the multi bypass tray.

This section explains how to detach and reattach the multi bypass tray.

  1. Remove any paper in the bypass tray.

  2. Push the bypass tray extension in.

  3. Detach the multi bypass tray.

    image

  4. Reattach the multi bypass tray.

    image

  5. Pull the bypass tray extension out.

  6. Load paper in the bypass tray.

TopPreviousNext
Copyright (C) 2007