Skip headerGelSprinter GX7000
ContentsPreviousNextHelp

Machine Body

This is a front view of the printer.

image

image

  1. Top cover

    Normally, keep this cover closed. If you cannot locate paper jams, or jammed paper cannot be removed easily, you can check the condition of paper from the top of the printer.

  2. Tray 1 output ramp

    Prints are delivered on top of the Tray 1 cover.

  3. Tray 1 output ramp extension

    Pull out when using large paper to keep the printed paper from falling.

  4. Tray 1 cover

    This is attached to Tray 1.

    To load paper, lift off the Tray 1 cover.

    If you want to print on paper larger than A4 or letter size, pull the Tray 1 cover extension.

  5. Tray 1

    Load paper here.

    If you want to print on paper larger than A4 or letter size, pull the tray extension out.

  6. Envelope selector

    For envelopes, set the lever to the rear position image; for everything else, set the lever to the forward position image.

  7. Print cartridge (yellow)

  8. Print cartridge (magenta)

  9. Print cartridge (cyan)

  10. Print cartridge (black)

  11. Right front cover

    Normally, keep this cover closed. Open to install or replace Print cartridges.

  12. Paper feed wheel

    Use to wind out paper jammed around the guide board.

  13. Left cover

    Normally, keep this cover closed. Open this cover when you need to turn the paper feed wheel.