Skip headerimageimage
ContentsPreviousNextHelp

Top Page > Troubleshooting > Status Monitor Errors > Network Interface Board Error

Network Interface Board Error

An error in the network interface board network function has occurred. Do the following:

  1. Turn the machine off.

  2. Turn the machine on.

    If the message reappears, do the following:

  3. Turn the machine off.

  4. Unplug the power cable.

  5. Remove the network interface board.

  6. Plug the network interface board in securely, and then secure it.

  7. Plug the power cable in.

  8. Turn the machine on.

    If the message reappears, contact your service representative.

Reference

TopPreviousNext
Copyright (C) 2006, 2007 All rights reserved.