Copier Function Specification

• You can select one of 5 preset ratios (2 enlargement ratios, 3 reduction ratios).

• Copies can be reduced or enlarged as follows:

  Metric

  200 % (enlarge area by 4) : -

  141 % (enlarge area by 2) : A5A4

  93 %:-

  71 % (reduce area by ¹/₂): A4B5

  50 % (reduce area by ¹/₄): -

• You can select one of 6 preset ratios (2 enlargement ratios, 3 reduction ratios).

• Copies can be reduced or enlarged as follows:

  Inch

  155 %: HTLLG

  129 %: HLTLT

  100 %:-

  93 %:-

  78 %: LGLT

• You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or margins will appear on copies.

• The reproduction ratios you can specify are 25-400 %.

• You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or margins will appear on copies.

You can scan files, and then print a specified number of copies in the order the files were stored.

• Following paper sizes and orientations can be duplexed.

  A4, B5, A5, Letter, Half Letter, Executive(184.2 mm266.7 mm (7.310.5 inches)), 16K(195267 mm(7.710.6 inches)), Postcard

• You cannot use the following copy paper with this function:

  • OHP transparencies

  • Thick paper

  • Envelope

  • Glossy paper

• When an odd number of originals are placed in the ADF, the back of the last page of copied paper is blank.

• During copying, the image is shifted to allow for the binding margin.

• In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on copy paper sizes and the number of originals.

• The reproduction ratios you can specify are 25-400 %.

• If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the image might not be copied.

• You cannot use custom size paper.

You can enlarge an image and print it over multiple sheets.

You cannot use the ADF with this function.

Copies by reversing the image from left to right, as reflected in a mirror.

You cannot use the ADF with this function.

The original image is copied repeatedly.

You cannot use the ADF with this function.

The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select.

You cannot use the ADF with this function.