Using the SmartDeviceMonitor for Client

SmartDeviceMonitor for Client is an application that has functions such as the peer-to-peer printing machine monitoring. We recommend you install this application on the client computer. SmartDeviceMonitor for Client is required if you need to print over a network in a Windows 98/Me environment.

To use this function under GX 3000SF, the optional network interface board must be installed

Operating System: Windows 98/Me
Protocol Stack
TCP/IP protocol supplied with Windows 98/Me
NetBEUI protocol supplied with Windows 98/Me
Operating System: Windows 2000
Protocol Stack
TCP/IP protocol supplied with Windows 2000
NetBEUI protocol supplied with Windows 2000
Operating System: Windows Server 2003
Protocol Stack
TCP/IP protocol supplied with Windows Server 2003
Operating System: Windows XP
Protocol Stack
TCP/IP protocol supplied with Windows XP
Operating System: Windows NT 4.0
Protocol Stack
TCP/IP protocol supplied with Windows NT 4.0
NetBEUI protocol supplied with Windows NT 4.0

What can you do with it?

Using SmartDeviceMonitor for Client, you can do the following:

Peer-to-peer printing
- Send print jobs directly to the network printer without going through a print server.
- Print using a substitute printer if there are too many jobs waiting on the specified printer, or if an error disables printing (Recovery Printing).
- Allocate multiple print jobs to multiple printers (Parallel Printing).
- Preregister groups of printers specified for Recovery Printing or Parallel Printing.
Receive error message notification if an error occurs in the machine while it is printing or sending a job.
Monitoring function
- Check the machine status such as the remaining amount of paper while printing.
- Simultaneously monitor multiple machines in use.
- Check the machine's network settings and system configuration.
Be notified of print completion.
View up to 100 print jobs that belong to you.