Original Orientation of TWAIN Scanner

To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made in the Scanner Control dialog box must match. Be sure to place your original in the orientation .

Open the Scanner Control dialog box.
In the [Original Scan Method] area, select where the original is placed or loaded.
In the [Rotation] box, select [Off], [Right 90 degrees], or [Left 90 degrees].

The following table shows the relationship between the original orientation and the Scanner Control dialog box settings:

Placing an Original on the Exposure Glass
Originals	TWAIN Scanner Control Dialog Box Key
Vertical This orientation is the TWAIN driver's standard setting. Place originals in this orientation normally	[Off]
Horizontal	[Left 90 degrees].

Placing an Original in the ADF
Orientation	TWAIN Scanner Properties Dialog Box Key (Original Orientation)
Vertical	[Portrait].
Horizontal	[Landscape]