Skip headerimageimage
ContentsPreviousNextHelp

Top Page > Specifying and Adjusting the Machine's Operational Settings > Registering Addresses > Deleting a Registered Quick Dial Keys

Deleting a Registered Quick Dial Keys

You can delete the destination registered to a Quick Dial key.

  1. Press the [Menu] key.

    panel keys illustration

    The Menu screen appears.

  2. Press the [Up arrow key] or [Down arrow key] key to display [Program Dest.], and then press the [Yes] key.

    Program Dest.?     Up arrow key
     OK=Yes / or 1-3   Down arrow key

  3. Press the [Up arrow key] or [Down arrow key] key to display [Quick Dial], and then press the [Yes] key.

    1 Quick Dial?      Up arrow key
     OK=Yes            Down arrow key

  4. Press the [Quick Dial] key to which the data you want to delete is registered.

    -Select Q. Dial key-
                        

    A confirmation screen appears.

  5. Press the [No] key.

    Programmed Save?    
    OK=Yes (Edit/Del=No)

  6. Press the [Left arrow key] or [Right arrow key] key to select [Delete], and then press the [Yes] key.

    Edit  *Delete       
     Left arrow key,Right arrow key & Yes          

    If you try to delete a destination specified as a transfer destination, a confirmation screen asking whether you want to save the transfer destination appears. To save the destination, press the [Yes] key. To delete the destination, press the [No] key.

    A message notifying you that the deletion is complete appears.

  7. Press the [No] key twice.

    The initial screen appears.

TopPreviousNext
Copyright (C) 2006, 2007 All rights reserved.