ContentsPreviousNext |
Follow the procedure below to change the SmartDeviceMonitor for Client settings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
If you via a print server connected to the printer are using the SmartDeviceMonitor port, Recovery Printing and Parallel Printing cannot be used from the client.
Windows 98:
Open [Printers] window from [Start] menu.
In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].
Click the [Details] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
Windows 2000 / Windows NT 4.0:
Open [Printers] window from [Start] menu.
In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].
On the [Ports] tab, click [Configure Port].
The [Port Settings] dialog box appears.
Windows XP, Windows Server 2003:
On the [Start] menu, point to [Settings], and then click [Printers and Faxes].
In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].
Click the [Details] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
For TCP/IP, timeout setting can be configured. If no settings on the [Recovery/Parallel Printing] tab are available, follow the procedure below.
Click [Cancel] to close the [Port Configuration] dialog box.
Start SmartDeviceMonitor for Client, and then right-click the SmartDeviceMonitor for Client icon on the taskbar.
Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each port] check box.
Click [OK] to close the [Extended Features Settings] dialog box.
For IPP, you can specify the IPP user settings and the proxy and timeout settings.
See the SmartDeviceMonitor for Client Help.
For information about these settings, see SmartDeviceMonitor for Client Help.