Skip headerimageimage
ContentsPreviousNextHelp

Top Page > Read This First > Guide to Components > Option > Network Interface Board GX4

Network Interface Board GX4

By installing this optional network interface board in the machine, you can print over the network. (The GX 3050SFN model is fitted with a network interface board.)

layout

  1. Ethernet Port

    Use a network interface cable to connect the machine to a network.

Check the LEDs on the Ethernet port

layout

  1. The green LED lights if the machine is properly connected to the network.

  2. The orange LED lights when the machine is sending or receiving data via the network.

TopPreviousNext
Copyright (C) 2006, 2007 All rights reserved.