Skip header
Screen reader supported pageStandard
 

Top Page > Using the Scanner Function > Various Scan Settings > Specifying Scan Size

Specifying Scan Size

Select the size of the original you want to scan.

The following items and sizes can be selected:

[ADF]: Scans original sizes using the ADF.

A4Landscape, A5Landscape, B5Landscape, LTLandscape, HLLandscape, LGLandscape, EXE

[E.Gl]: Scans original sizes using the exposure glass.

A4Landscape, A5Landscape, B5Landscape, A6Landscape, LTLandscape, HLLandscape, EXE

1Press the [Left arrow key] or [Right arrow key] key to select placing an original, and then press the [Down arrow key] key.

*ADF(A4Landscape)  E.Gl(A4Landscape)
 Scan=Yes (Size=Down arrow key)  

2Press the [Left arrow key] or [Right arrow key] key to select an original size, and then press the [Yes] key.

Left arrow key*A5Landscape  A4Landscape  B5LandscapeRight arrow key    
 Left arrow key,Right arrow key & Yes          

Note

  • If you send a file scanned using [B&W] mode, the page size associated with the file may become smaller than the size specified during scanning. To maintain the specified page size when sending a file, set [Scan Type] to [Color] or [Gray].

  • If a file is scanned using [B&W] mode, then sent and printed, the size of the printed pages may be smaller than the size specified during scanning. To print a file at the size specified originally, specify the page size in the printer properties dialog box.